×

How to Remove Tile From a Plaster Wall

The trickiest part about removing tile from a plaster wall is doing so without damaging the wall behind it. If you work carefully, you should cause minimal damage, which can be repaired with a thin coat of patching plaster.

Removing wall tiles requires a careful hand.

Things You Will Need

  • Safety glasses/goggles
  • Work gloves
  • Dust mask
  • Putty knife
  • Hammer
  • Chisel or small pry bar

The trickiest part about removing tile from a plaster wall is doing so without damaging the wall behind it.  If you work carefully, you should cause minimal damage, which can be repaired with a thin coat of patching plaster.

  1. Cover the floor as well as the tub, sink and/or counter top with drop cloths.
  2. Remove the cap to expose the screw.
  3. Remove your bathtub fixtures if necessary. There is a cap on the end of the taps. Pop it off, and then unscrew (turn counter-clockwise) the fixture.
  4. Look for loose tiles by running a putty knife or pry bar under the edge tiles, both vertically and horizontally. Wedge the knife or bar between the tile and the wall, and it should pop off with minimal pressure.
  5. You may need a hammer and chisel.
  6. Use the hammer against the chisel or pry bar to pop off the tougher tiles. Hold the chisel at a 45-degree angle and tap it gently with the hammer. Once you’ve got a space under the tile, you should be able to just pry it off. You can also use the utility knife to cut through the grout between the tiles.
  7. Start with the outermost tiles, both vertically and horizontally, and work your way down and across.
  8. A thin coat of patch plaster should take care of any damage to the wall.
  9. Scrape off any remaining adhesive and patch the wall once you have removed all the tiles.
  10. Tip

    Don't rush the job. Working carefully and slowly, you can remove the tiles without damaging the wall.

    Warning

    Don the safety gear. This can be a messy job that creates a lot of dust, and the tiles can break, leaving sharp edges.

Things You Will Need

  • Safety glasses/goggles
  • Work gloves
  • Dust mask
  • Putty knife
  • Hammer
  • Chisel or small pry bar

Tip

  • Don't rush the job. Working carefully and slowly, you can remove the tiles without damaging the wall.

Warning

  • Don the safety gear. This can be a messy job that creates a lot of dust, and the tiles can break, leaving sharp edges.

About the Author

Kate Hillsing has been a freelance writer and editor since 2005. Prior to that, she put her diploma in business administration to work in executive search and outplacement firms. She writes parenting articles for various print publications.

Photo Credits

  • tiled wall image by Samuray from Fotolia.com
  • tiled wall image by Samuray from Fotolia.com
  • hot tap image by pncphotos from Fotolia.com
  • cold chisel image by Aleksandr Ugorenkov from Fotolia.com
  • Plasterer making good hole in studwork wall image by Bryan Clark from Fotolia.com