Things You Will Need
- Drop cloth
- Breathing protection
- Tape measure
- 1-by-1 board
- Cordless drill
- Phillips-head bit
- 12 drywall screws
- Drywall scrap
- Utility knife
- Drywall tape
- Spackling paste
- 4-inch drywall knife
- Ceiling plaster
- Rigid plastic foam
Microscopic fungi create mold. These organisms exist wherever there is organic material that they can consume.
They reproduce by producing spores. Chances are there are already mold spores in your home, but they do not reach troublesome levels unless they are exposed to water.
Mold becomes established on a ceiling whenever there is moisture to help the spores grow. This moisture can come from a leaky roof, high humidity such as in a bathroom or a flood.
To eliminate mold, you must remove portions of the mold-affected ceiling and replace them.
- Spread a drop cloth over the room to keep your furniture and floor clean. If you are removing a drywall ceiling, you will release plaster dust. Put on breathing protection to prevent breathing in the dust.
- Slice away the portion of the ceiling that is infected with mold. Use a handsaw to remove portions of the drywall ceiling. Measure the dimensions of the hole.
- Cut a strip of 1-by-1 board into four lengths that are 4 inches longer than the hole. Insert these wooden pieces into the hole and rest them so that they overlap the hole in each direction by 2 inches.
- Screw drywall screws through the drywall and into the wood pieces using a cordless drill with a Phillips-head bit. Use eight screws total, one screw on each side of each piece of wood.
- Cut a piece of drywall with a utility knife so that it fits snugly into the hole. Place the drywall piece into the hole and attach it to the wood using four drywall screws.
- Cover the seams between the drywall piece and the rest of the drywall with drywall tape. Then cover the tape and the screws with spackling paste using a 4-inch drywall knife.
- Coat the new drywall with ceiling plaster, using the drywall knife. Texture the plaster so that it blends with the rest of your ceiling. For example, if your ceiling is popcorn, mix rigid plastic foam pieces into the plaster and apply the plaster to the ceiling.