How to Use the Sanitize Feature on the Frigidaire Dishwasher
The sanitize feature on newer models of Frigidaire dishwashers ensures the cleanliness of your dishes by heating the water for the final rinse cycle to 155 degrees Fahrenheit for nine minutes. You will find the “Sanitize” button pad in the line of pads along the top front of the machine.
The water heater that provides hot water to the dishwasher should be set at 120 degrees. Any interruptions, such as a power failure, will interrupt the heating process, resulting in your dishes not being sanitized.
Tip
Before using the "Sanitize" feature, ensure that your water heater is set at 120 degrees Fahrenheit.
-
Load the dishwasher with dirty dishes. Add the detergent and any rinse aid you use. Latch the door and select the cycle you want to use. You can only use the sanitize feature on the “Pots and Pans,” “Normal Wash” or “Econo Wash” cycles. "Econo Wash" is for lightly used dishes.
-
Press the “Sanitize” pad. A light will come on above the pad.
-
Turn on the faucet in a sink near the dishwasher and let it run until the water is hot. Turn off the water and press “Start” to run the dishwasher.
The Drip Cap
- The sanitize feature on newer models of Frigidaire dishwashers ensures the cleanliness of your dishes by heating the water for the final rinse cycle to 155 degrees Fahrenheit for nine minutes.
- You will find the “Sanitize” button pad in the line of pads along the top front of the machine.
References
- "Frigidaire Dishwasher Use & Care Manual"; Electrolux Home Products Inc.; 2002
Writer Bio
Margaret Mills has been writing for more than 30 years, focusing on articles about religion, forestry, gardening and crafts. Her work has appeared in religious periodicals including "Focus on the Family" and similar publications. Mills has a Bachelor of Arts in English from Northwest Nazarene University.
Photo Credits
- Jupiterimages/Photos.com/Getty Images
- Jupiterimages/Photos.com/Getty Images
More Articles
