×
Back Button

How to Clean the Sole Plate of a Rowenta Iron

Kallie Johnson

A Rowenta iron uses heat and steam to remove wrinkles from clothing. The heated soleplate of the iron is then pressed against the fabric. In the course of ironing, it may collect residue from starch or fabric that burns on it. After each use, clean the Rowenta iron soleplate with water to remove this residue.

If the residue is not removed using water, or fabric is burnt to the soleplate, Rowenta recommends cleaning the soleplate with a Rowenta soleplate cleaning kit.

Regular Cleaning

  1. Dampen a soft, cotton cloth. Squeeze to remove excess moisture.

  2. Turn the Rowenta iron off after use and unplug it from the electrical outlet.

  3. Allow the iron to cool slightly, so it is still warm, but not too hot to touch.

  4. Wipe the soleplate quickly to remove residue and buildup.

Deep Cleaning

  1. Purchase a Rowenta soleplate cleaning kit.

  2. Turn the iron off. Unplug it from the electrical outlet. Allow the iron to cool slightly, so it is still warm, but not too hot to touch.

  3. Apply a 2-inch squirt of the cleaning cream to the cleaning cloth. The cleaning cloth is the white cloth in the Rowenta iron cleaning kit.

  4. Rub the cream onto the warm iron. Continue rubbing until the entire surface has been coated with a thin layer. The heat of the iron will remove most of the cleaner. This may produce a steamy or smoke-like appearance, which is completely normal.

  5. Polish the iron with the grey finishing cloth to remove all remaining cleaning residue.

The Drip Cap

  • A Rowenta iron uses heat and steam to remove wrinkles from clothing.
  • After each use, clean the Rowenta iron soleplate with water to remove this residue.
  • Squeeze to remove excess moisture.
  • Turn the Rowenta iron off after use and unplug it from the electrical outlet.
  • Allow the iron to cool slightly, so it is still warm, but not too hot to touch.