×

How to Install Tape in a P-Touch Label Maker

The P-touch Label maker is a convenient way to categorize and customize your entire home, office or any other project. The machine has a built-in QWERTY keyboard for easy typing and prints on an adhesive label that is ready for use. The label maker uses thermal technology, which eliminates the need for ink.

There are a wide variety of label types you can buy depending on what colors you like. The portable machine is powered by AA batteries.

  1. Turn off the label maker before installing the tape.

  2. Press the part marked as "<<" and lift the cassette cover.

  3. Position the tape into the slot. Make sure to feed the end of the tape under the tape guides.

  4. Check that the lever is up before closing the cover; the cover will not close if the lever is pressed down.

  5. Close the cassette cover.

  6. Press the power key to turn on the device. If using an AC adapter, plug the adapter into the wall then press the power key.

  7. Type a sample to test if your installation was successful.

The Drip Cap

  • The P-touch Label maker is a convenient way to categorize and customize your entire home, office or any other project.
  • The machine has a built-in QWERTY keyboard for easy typing and prints on an adhesive label that is ready for use.
  • Make sure to feed the end of the tape under the tape guides.