Wrapping the pipes in foam insulation can help lower their exposure to the elements, reducing the chance of freezing. Pipe insulation comes in a variety of sizes, and you should be able to install it easily.
Things You Will Need
-
Place full sections of insulation around the pipe wherever possible. Butt the ends of the insulation sections together on the pipe.
-
Pull the plastic strip out of the slit in the pipe insulation to expose the adhesive. Press the sides of the slit together to seal the pipe insulation shut.
-
Measure and cut sections of pipe insulation to fit where full sections will not. Place the smaller sections on the pipe and seal shut.
-
Cut sections of pipe insulation at a 45-degree angle and place them over elbows in the water pipe, matching up the angles to cover the elbow. Seal the pipe insulation shut.
-
Cover all seams and joints with a wrap of acrylic or duct tape.
The Drip Cap
- Insulating outside water pipes can save you the hassle and expense of repairing frozen or burst pipes.
- Butt the ends of the insulation sections together on the pipe.
- Cut sections of pipe insulation at a 45-degree angle and place them over elbows in the water pipe, matching up the angles to cover the elbow.