Cleaning the rocking chair
Wipe down the chair with a rag dampened with soapy water, being careful not to get the wood too moist. Remove all dirt and dust. Let the chair air dry until you feel no moisture at all; this may take up to a hour. Use a fan to speed the drying if you wish.
Rub the wood with fine sandpaper, sanding lightly, in a circular motion, from top to bottom. Be thorough, and get into the smallest corners and creases by folding the sandpaper in half and using the folded edge to sand. When you have sanded all the surfaces, wipe off any dust with a clean dry towel.
Paint from the top to the bottom of the chair with long, up-and-down strokes. For the smaller creases, use the small ceramic paintbrushes. Cover all surfaces of the chair with one thin coat of paint.
Let the chair dry completely; this may take up to a hour. When the first coat is dry to the touch, paint a second coat and let it dry completely.
Add stenciling or paint in whatever designs you wish: classic alpine floral designs for an old-fashioned chair, blocky animal designs for chid's chair, geometric patterns for a modern chair. Paint directly inside or around stencils, but pencil in designs first if you are painting freehand.
Things You Will Need
- Wooden rocking chair
- Bucket of soapy water
- Cleaning rag
- Fine grit sandpaper
- Flat interior latex paint
- 2- or 3-inch paintbrush
- Small ceramic paintbrushes
- Sand in a well-ventilated area. Paint in a well-ventilated area, away from any dust or debris that may stick to the painted chair. Before painting, stir your paint well, to make sure the color is even throughout the can. While painting, charge your paintbrushes properly: dip your brush head only halfway into the paint and make sure the brush does not drip paint when you remove it. This will help lay a smoother surface and will prevent uneven, thick paint layers and drips on the finished chair.