×
x

How to Attach HardiPlank Siding

HardiPlank siding is a type of building material made from a combination of sand, cellulose fibers and cement. This durable construction element, manufactured by the James Hardie Company, is resistant to elements such as rain, wind, snow and hail.

Nails are the preferred method for attaching HardiPlank siding.

Things You Will Need

  • Siding nails or Panelfast nails
  • Hammer

HardiPlank siding is a type of building material made from a combination of sand, cellulose fibers and cement.  This durable construction element, manufactured by the James Hardie Company, is resistant to elements such as rain, wind, snow and hail.

Attaching HardiPlank siding to the exterior of a home is a fast process once the pieces are cut. 

  1. Hold the piece of HardiPlank siding up flush with the bottom and side of one exterior wall. Place it so there’s at least 6 inches between the bottom of the siding and the top of the foundation.
  2. Position a siding nail, if attaching to wood — or a Panelfast nail (a type of fastener with a traditional nail head, but designed for harder materials like metal) if attaching to steel — at a 45-degree angle on the right corner. Place the nail approximately 1 inch below the top of the siding. Drive the nail in with a hammer.
  3. Drive nails through at the rate of one per foot until you reach the end of the board.
  4. Position the next piece of HardiPlank siding so the bottom covers the nail line on the previous piece. Nail into place in the same manner. Repeat this process, cutting pieces to go around any windows, vents or other exterior protrusions as necessary.
  5. Tip

    Only attach HardiPlank siding to a building that has a water-resistant barrier, such as a housewrap, installed over the OSB or plywood exterior walls. Cut the HardiPlank siding with electric or manual shears for best results. Wear a mask when cutting to prevent inhalation of the siding dust.

Things You Will Need

  • Siding nails or Panelfast nails
  • Hammer

Tips

  • Only attach HardiPlank siding to a building that has a water-resistant barrier, such as a housewrap, installed over the OSB or plywood exterior walls.
  • Cut the HardiPlank siding with electric or manual shears for best results. Wear a mask when cutting to prevent inhalation of the siding dust.

About the Author

Sarah Schreiber has been writing since 2004, with professional experience in the nonprofit and educational sectors as well as small business. She now focuses on writing about travel, education and interior decorating and has been published on Trazzler and various other websites. Schreiber received a Bachelor of Arts in mass communications.

Photo Credits

  • Comstock/Comstock/Getty Images
  • Comstock/Comstock/Getty Images