Many times it is difficult to identify where the roof leak is located because the hole may be a tiny space between the flashing and the roof. You will need to check your entire roof thoroughly and use the necessary materials to repair the leak.
Things You Will Need
-
Use a ladder to climb up to the roof. Make sure to walk on the rafters, and inspect the gutter system, flashing, seams, seals and shingles for leaks.
-
Remove all dirt from the area to be patched by scraping the area with a putty knife. Put strips of butyl tape in a square around the perimeter of the area to be patched.
-
Use tin snips to cut out a patch of galvanized metal that will overlap the leaky area by 3 inches on all sides. Place the metal patch over the butyl tape.
-
Predrill holes in the galvanized metal patch, as well as the roof. Use metal screws to screw through the patch, butyl tape and roof metal. Place the screws every 2 inches around the perimeter of the patch.
-
Apply caulk to seal the edges of the patch and the screws. Once it dries, cover with a roof coating.
The Drip Cap
- Mobile home roofs tend to leak because of changes in temperature and harsh weather conditions.
- It is important to repair the leaky roof before fixing the stains caused by the leak in your home.
- Use metal screws to screw through the patch, butyl tape and roof metal.
- Once it dries, cover with a roof coating.