DIY Dishwasher Enclosure

Dishwashers are a time-saving utility in the modern kitchen, but their bland coloring makes them stand out from the cabinets that surround them.
A dishwasher cabinet helps the dishwasher blend in to the kitchen.A dishwasher cabinet helps the dishwasher blend in to the kitchen.
If you build your own enclosure to house your dishwasher, you can keep the appliance out of sight when it is not being used. A dishwasher enclosure decorated like the rest of your kitchen cabinets will blend into its surroundings and improve the overall appearance of your kitchen.

Step 1

Measure the height, width and depth of the dishwasher using a tape measure. Add 4 inches to the depth, 2 inches to the height and 2 inches to the width to find the dimensions of the cabinet. Cut two pieces of 3/4-inch hardwood to the height and depth of the cabinet using a circular saw. Cut one piece of 3/4-inch hardwood to the width and height of the cabinet.

Step 2

Cut one piece of 3/4-inch hardwood to the depth and width of the cabinet. Cut two pieces of 3/4-inch hardwood to a length equal to the width of the cabinet and a width of 2 inches. Cut two pieces of 3/4-inch hardwood to a length equal to the width of the cabinet and a width of 6 inches.

Step 3

Apply wood glue to the end faces of the 6-inch and 2-inch wide pieces. Stand one of the cabinet height and depth pieces so the cabinet height edges are vertical. Stick one 2-inch wide piece to the bottom of the vertical piece so it lies at right angles to the vertical piece. Stick the other 2-inch piece to the top of the vertical piece. Stick one of the 6-inch-wide pieces to the opposite edge at the bottom and the other 6-inch piece at the top.

Step 4

Attach the other cabinet height and width piece to the glued faces of the 6- and 2-inch wide pieces, to form the basic cabinet frame. The cabinet has an open back with two 6-inch-wide support braces while the front has two 2-inch-wide support braces. Glue the top of the cabinet. Place the cabinet width and depth piece on top of the cabinet frame.

Step 5

Reinforce all joints with countersunk 1-inch-long screws and a hammer drill with a screwdriver drill bit. Screw the two hinges to one cabinet height edge of the remaining hardwood piece so they are equidistant from the corners. Turn the piece over and screw the handle to the opposite edge of the piece, to form the cabinet door. Stand the door in place at the front of the cabinet. Screw the hinges to the inside of the cabinet frame.

Things You Will Need

  • Tape measure
  • 5 pieces 3/4-inch-thick hardwood
  • Circular saw
  • Wood glue
  • 1-inch-long screws
  • Hammer drill
  • Screwdriver drill bit
  • 2 hinges
  • 1 cupboard door handle

Tip

  • Paint or varnish the cabinet to decorate it. This also has the advantage of making the cabinet last longer by coating it in a weatherproof, protective layer. Ideally, paint or varnish the cabinet so it is the same color as the rest of the cabinets or furniture in the room, so it blends in.

Warning

  • Always wear eye protection and gloves when cutting wood. Sawdust causes eye and skin irritation, which gloves and goggles protect against. Additionally, gloves will protect from splinters while eye protection will prevent wood particles entering the eye and causing injury or even blindness.

About the Author

Based in the United Kingdom, April Kohl has been writing since 1992, specializing in science and legal topics. Her work has appeared on the Second Life News Network website and in British Mensa's "LSQ" magazine. Kohl holds a Bachelor of Science in physics from Durham University and a diploma in English law from the Open University.