Step 1
Plug the Annovi Reverberi pump into a working electrical supply if nothing on the device functions. Check the fuse or circuit breaker and replace or reset as needed.
Step 2
Check the nozzle for obstructions and clean with a damp cloth if the pump pressure does not reach the desired level. Change the nozzle and replace the valve seal if necessary.
Step 3
Clean the valves on the pump if the pump is extremely noisy during use. Check all connections on the pump and tighten as necessary.
Step 4
Tighten the piston packing if there is water leaking from the bottom of the pump. Tighten the connections on the pump and the water hose as well.
Step 5
Reduce the pressure setting if there is a buildup of pressure when the pump is operated.
Step 6
Contact Annovi Reverberi with additional questions or problems.