Programming a remote control to your Chamberlain Liftmaster Elite series garage door opener is simple.
-
Press and release the "Radio" button on the Logic 3.0 board; the adjacent light-emitting diode (LED) indicator will turn on.
-
Hold down the button on the remote control; if your remote has more than one button, press and hold the largest button. Release the button on the remote when the LED indicator begins flashing rapidly. After releasing the button, the LED indicator should glow solidly.
-
Press and release the "Radio" button again to complete the remote programming process.
The Drip Cap
- Manufactured by the Chamberlain Group, the Liftmaster Elite series is a line of popular belt-drive, chain-drive and screw-drive garage door openers.
- After releasing the button, the LED indicator should glow solidly.
Check out this related video from Homesteady on Youtube.