The Eight Steps Involved in Water Purification
The first step of water purification is often ion removal, or softening. This processes uses holding containers that are negatively charged. Water is pumped into these containers. If there are metal particles present in the water, they are pulled toward the negatively charged areas and cannot escape.
This prevents the metal traces from entering the water supply. Common metals that are eliminated during this step include iron and mercury. These substances cause health issues, if consumed, and can damage water pump systems as well.
The second step uses carbon to filter water. A layer of carbon serves as a filter and water must pass through it to continue through the filtration process. Harmful substances like chlorine and pesticides are generally absorbed at this stage of the process. If the carbon becomes over-saturated with contaminants, it can stop working and release toxins back into the water supply. Because of this, fresh carbon is cycled regularly.
Water passes through a paper filter designed to remove sediment and catch large particles of dirt. This filter can catch particles smaller than people are able to see. While dirt is often not toxic, it can create problems for filter machinery during later steps.
During reverse osmosis, water moves through a very tight filter. On one side the water is filled with impurities and on the other side the water is clear. The two sides begin to balance each other out, watering down any present particles in the process. Often, several separate osmosis filters are used. This way, any particles that escape filtration are caught the second time.
Here, another carbon filter is used. This filter is smaller than previous filters, and catches very tiny contaminants found in the water. Because the filter is made from carbon, it can not only screen for particles, but also absorb any remaining toxins.
UV light is used as an antibiotic in this stage. High-energy light is focused to destroy any organisms that have survived the process. Because light is used instead of harmful substances, the water remains untainted and drinkable.
A third, even smaller micro filter is used as an extra measure of purity protection. This is the final filter used in the process, and ensures that no random contaminants can enter the system during maintenance or other problems.
The last step in the purification process is ozonation. This infuses the water with a form of oxygen, which protects it from any future microbes. High-voltage power is combined with rich oxygen, creating ozone. This ozone kills harmful microbes on contact. Because it is unstable, the ozone in the water becomes natural harmless oxygen after several minutes. This short time, however, is all that is needed for the process to be successful, and to keep drinking water protected.
Benjamin Aries has been involved in digital media for much of his life and began writing professionally in 2009. He has lived in several different states and countries, and currently writes while exploring different parts of the world. Aries specializes in technical subjects. He attended Florida State University.
- Stephen Davies
- Stephen Davies