Precision is needed to make sure your cuts are even so your stool, whether new or old, is perfectly level and comfortable to sit upon.
Things You Will Need
-
Examine the feet of your bar stool. Some stools have feet or caps that are permanently soldered onto the ends of the legs, while others have rubber or removable stoppers. If your stool does not have removable feet, you will need to purchase rubber stoppers at the home repair or hardware store.
-
Measure the height of the counter where the stool will be used, then measure the height of the bar stool. Decide how tall you would like to make your bar stool. Subtract the desired height from the existing height. Take into consideration the thickness of the rubber stoppers at the feet.
-
Turn the stool on its side. Remove the feet if possible. Measure the amount that you would like to cut off and mark with a marker.
-
Turn the stool to the next leg and repeat Step 3. Repeat for the third and fourth legs.
-
Cut the legs with a hacksaw. Make even, long strokes when sawing. Do not rock the saw back and forth. Apply pressure on the forward stroke only, not the back. The idea is to have a straight cut so the legs will sit level.
-
Sand the ends of the legs so they are smooth and have no rough spots.
-
Place the feet on the ends of the legs and check the height and balance of the bar stool. If it is off a small amount, try to adjust the feet to see if it will help stabilize it.
The Drip Cap
- Moving, garage sale find or clearance -- these are all reasons why you would need to cut metal bar stool legs to resize them.
- Some stools have feet or caps that are permanently soldered onto the ends of the legs, while others have rubber or removable stoppers.
- Turn the stool on its side.
- Measure the amount that you would like to cut off and mark with a marker.
- Place the feet on the ends of the legs and check the height and balance of the bar stool.